FRONT BRAKE DISASSEMBLY


  1. REMOVE FRONT DISC BRAKE PISTON

    A013621E03

    1. Place a shop rag or piece of cloth between the piston and disc brake cylinder.

    2. Apply compressed air to remove the piston from the disc brake cylinder.

      CAUTION:

      Do not place your fingers in front of the piston when applying compressed air.

      Note

      Do not spatter the brake fluid.

  2. REMOVE CYLINDER BOOT

    A0138RME01

    1. Using a screwdriver, remove the cylinder boot from the disc brake cylinder.

      Tech Tips

      Wrap the screwdriver tip in protective tape before use.

  3. REMOVE PISTON SEAL

    A0137G1E01

    1. Using a screwdriver, remove the piston seal from the disc brake cylinder.

      Note

      Do not damage the inner surface or piston seal groove of the cylinder.

      Tech Tips

      Wrap the screwdriver tip in protective tape before use.

  4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

  5. REMOVE FRONT DISC BRAKE BLEEDER PLUG