BRAKE BOOSTER (for RHD) REMOVAL

Note


  • Do not adjust the brake booster push rod.

  • Completely bleed the vacuum from inside the brake booster by depressing the brake pedal several times because the piston of the master cylinder is forced out of the master cylinder due to the pressure inside.


  1. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

    Click here

  2. SEPARATE MASTER CYLINDER PUSH ROD CLEVIS

    A0135YT

    1. Remove the clip and push rod pin, and separate the push rod clevis.

  3. REMOVE BRAKE BOOSTER ASSEMBLY

    A0138ZX

    1. Separate the vacuum hose assembly from the brake booster assembly.

    2. A0138KW

      Remove the 4 nuts and the brake booster assembly.

    3. Remove the gasket from the brake booster assembly.

  4. REMOVE CHECK VALVE GROMMET

    A0137M9

    1. Remove the check valve grommet from the brake booster assembly.

  5. REMOVE MASTER CYLINDER PUSH ROD CLEVIS


    1. Loosen the lock nut and remove the master cylinder push rod clevis from the brake booster assembly.