PARKING BRAKE LEVER ADJUSTMENT


  1. ADJUST CLEARANCE BETWEEN BRAKE SHOES AND DRUM

    Note

    Do not use screwdrivers or any other tools to rotate the adjuster.


    1. Press the brake pedal 30 times (not the parking brake). The clearance between the brake shoes and drum will be adjusted automatically.

  2. INSPECT PARKING BRAKE LEVER TRAVEL


    1. Slowly pull the parking brake lever to the fully applied position, counting the number of clicks.

      Parking brake lever travel
      5 to 8 clicks at 196 N (20 kgf, 44 lbf)

  3. REMOVE CONSOLE BOX SUB-ASSEMBLY REAR

    A0137IU

    1. Remove the 2 bolts and console box.

  4. ADJUST PARKING BRAKE LEVER TRAVEL

    A0137NM

    1. Turn the adjusting nut until the parking brake lever travel is corrected to within the specified range.

      Parking brake lever travel
      5 to 8 clicks at 196 N (20 kgf, 44 lbf)

    2. Operate the parking brake lever 3 to 4 times, and check the parking brake lever travel.

    3. Check whether the parking brake drags or not.

    4. When operating the parking brake lever, check that the brake warning light comes on.

      Standard
      Brake warning light always comes on at the first notch.

  5. INSTALL CONSOLE BOX SUB-ASSEMBLY REAR

    A0137IU

    1. Install the console box with the 2 bolts.