REAR SPEED SENSOR REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE REAR SEAT CUSHION ASSEMBLY (for Separate Seat Type)

    A0137NL

    1. Disengage the 4 hooks and remove the rear seat cushion.

  3. REMOVE REAR SEAT CUSHION ASSEMBLY (for Bench Seat Type)

    A01392V

    1. Disengage the 4 hooks and remove the rear seat cushion.

  4. REMOVE REAR SEAT BACK ASSEMBLY (for Separate Seat Type)

    A0136X9

    1. Release the 2 hooks.

    2. Remove the 4 nuts, 4 bolts, 2 rear seat inner belts and rear seat back.

  5. REMOVE REAR SEAT BACK ASSEMBLY (for Bench Seat Type)

    A0136F8

    1. Disengage the 2 hooks.

    2. Remove the 2 nuts, 2 bolts and rear seat back.

  6. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (for 3 Door)

    A0136DW

    1. Remove the package tray trim panel.

  7. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (for 5 Door)

    A01366X

    1. Remove the package tray trim panel.

  8. REMOVE REAR SEAT OUTER BELT ASSEMBLY (for 3 Door)

    Tech Tips

    Use the same procedure as for the RH side.

  9. REMOVE REAR SEAT OUTER BELT ASSEMBLY (for 5 Door)

    Tech Tips

    Use the same procedure as for the RH side.

  10. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP (for 3 Door)

    A0138PN

    1. Remove the front door opening trim weatherstrip.

  11. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP (for 5 Door)

    A0137ZF

    1. Remove the rear door opening trim weatherstrip.

  12. REMOVE QUARTER INSIDE TRIM BOARD (for 3 Door)

    Tech Tips

    Use the same procedure as for the RH side.

  13. REMOVE REAR SEAT SIDE GARNISH (for 5 Door)

    Tech Tips

    Use the same procedure as for the RH side.

  14. REMOVE REAR WHEEL

  15. REMOVE REAR SPEED SENSOR

    A0136IE

    1. Disconnect the wire harness clamp from the body.

    2. Disconnect the speed sensor connector.

    3. Remove the wire harness clamp from the speed sensor connector.

    4. Remove the grommet, and pull the speed sensor out of the vehicle.

    5. A0137W3

      Disconnect the 4 clamps.

    6. A013841

      Using "TORX" socket wrench T30, remove the screw and speed sensor.