VEHICLE STABILITY CONTROL SYSTEM, Diagnostic DTC:C1288/88

DTC Code DTC Name
C1288/88 ECU Version Miss Match

DESCRIPTION

DTC Code DTC Detection Condition Trouble Area
C1288/88 ECM does not match ECM

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK CAN COMMUNICATION SYSTEM


    1. Check if the CAN communication system DTC is output Click here.

      Result
      Result Proceed to
      DTC not output A
      DTC output B

    B

    INSPECT CAN COMMUNICATION SYSTEM

    A

  2. PERFORM ENGINE VARIANT LEARNING


    1. Perform engine variant learning Click here.

      Tech Tips


      • Engine variant learning is automatically performed immediately after the Test Mode is entered.

      • If the engine variant learning has not been completed, the ABS warning, brake warning, VSC warning and SLIP indicator lights come on for several seconds. Then, the engine variant learning starts automatically. When it is completed, those lights start blinking in the test mode pattern.

        When the engine variant learning has already been completed, those lights blink in the Test Mode pattern.


    NEXT

  3. RECONFIRM DTC


    1. Turn the ignition switch off.

    2. Clear the DTC Click here.

    3. Start the engine.

    4. Check if the same DTC is recorded Click here.

      Result
      Result Proceed to
      DTC not output A
      DTC output B

    B

    REPLACE ECM

    A

    END