FRONT SHOCK ABSORBER WITH COIL SPRING DISPOSAL


  1. DISPOSE OF SHOCK ABSORBER ASSEMBLY FRONT

    A0138L4

    1. Fully extend the shock absorber piston rod, and fix it at an angle in a vise or similar tool.

    2. Using a drill or similar tool, slowly make a hole in the shaded area shown in the illustration to discharge the gas inside.

      CAUTION:


      • The gas is colorless, odorless and harmless.

      • Since the discharged gas may cause chips to scatter, cover the drill with a shop rag or a piece of cloth when making the hole.