REAR COIL SPRING REMOVAL

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

REMOVE REAR WHEEL

DRAIN BRAKE FLUID

SEPARATE REAR SPEED SENSOR

1. Disconnect the 3 clamps.

2. 

   Using "Torx" socket wrench T30, remove the screw and separate the speed sensor.

   Tech Tips

   The removal procedure for the RH side is the same as that for the LH side.

DISCONNECT REAR LH FLEXIBLE HOSE

1. Using SST, remove the brake tube.

   SST

   09023-00101

2. Remove the clip and disconnect the flexible hose from the rear axle beam.

   Note

   Do not damage the rear brake tube or flexible hose.

DISCONNECT REAR RH FLEXIBLE HOSE

SEPARATE PARKING BRAKE CABLE ASSEMBLY NO.3

1. Remove the nut and separate the parking brake cable.

SEPARATE PARKING BRAKE CABLE ASSEMBLY NO.2

LOOSEN REAR AXLE BEAM ASSEMBLY

1. Loosen the 2 bolts.

   Note

   Do not remove the bolts.

SEPARATE SHOCK ABSORBER ASSEMBLY REAR LH

1. Support both right and left sides of the rear axle beam with jacks. Insert a wooden block between the jack and the rear axle spring seat to prevent damage.

2. Remove the bolt and separate the rear shock absorber.

SEPARATE SHOCK ABSORBER ASSEMBLY REAR RH

REMOVE REAR COIL SPRING LH

1. Lower the jacks gradually.

2. Remove the coil spring, coil spring insulator upper and coil spring insulator lower.

REMOVE REAR COIL SPRING RH