FRONT LOWER SUSPENSION ARM REMOVAL


  1. REMOVE FRONT WHEEL

  2. REMOVE FRONT STABILIZER BOLT

    A0137UJ

    1. While holding the stabilizer bolt with a spanner, remove the 2 nuts.

    2. Remove the 4 retainers, 4 cushions, No. 2 retainer and stabilizer bolt.

  3. REMOVE FRONT SUSPENSION LOWER ARM

    A01384T

    1. Remove the clip and castle nut.

    2. A0135XUE01

      Install SST (spacer B) to the threaded section of the lower ball joint.

      SST
      09960-20010   ( 09961-02060 )

      Tech Tips

      Make sure the upper ends of the threaded section of the lower ball joint and SST (spacer B) are aligned.

    3. Using SST, separate the front lower suspension arm from the front axle assembly.

      A0136IYE01
      SST
      09960-20010   ( 09961-02010 )

      Note


      • Make sure to tie the string of SST to the vehicle to prevent SST from dropping.

      • Install SST so that A and B are parallel.

      • Be sure to place the wrench on the part indicated in the illustration.

      • Do not damage the lower ball joint dust cover.

      • Do not damage the drive shaft outboard joint boots.

      • Do not damage the front disc brake dust cover.

    4. A0138RX

      Remove the 2 bolts and front suspension lower arm.