BACK-UP LIGHT SWITCH REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE BATTERY


    1. Loosen the nut and disconnect the battery positive (+) terminal.

    2. A0136L6

      Remove the bolt and the battery clamp.

    3. Remove the battery.

  3. SEPARATE ENGINE ROOM RELAY BLOCK

    A0138XK

    1. Remove the 2 bolts.

    2. Disengage the claw and separate the engine room relay block.

    3. A0138NO

      Disengage the 3 wire harness clamps.

    4. A0136C9

      Provisionally set the engine room relay block to the hood support rod.

  4. REMOVE BATTERY CLAMP SUB-ASSEMBLY


    1. A0135TU

      Remove the 3 bolts and the battery clamp sub-assembly.

  5. SUPPORT MULTI-MODE MANUAL TRANSAXLE ASSEMBLY

  6. REMOVE TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR


    1. A0138IH

      Remove the 7 bolts and the transverse engine engine mounting insulator with the transverse engine engine mounting bracket.

  7. REMOVE BACK-UP LIGHT SWITCH ASSEMBLY

    A01372N

    1. Disconnect the back-up light switch connector.

    2. Separate the back-up light switch wire harness from the 2 clamps.

    3. A0136VLE01

      Using SST, remove the back-up light switch and the gasket from the transaxle case.

      SST
      09817-16011