BACK-UP LIGHT SWITCH REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE BATTERY


    1. Loosen the nut and disconnect the battery positive terminal.

    2. A0136EQE01

      Remove the bolt and battery clamp.

    3. Remove the battery.

  3. SEPARATE ENGINE ROOM RELAY BLOCK

    A0138XK

    1. Remove the 2 bolts.

    2. Disengage the claw and separate the engine room relay block.

    3. A0136C9

      Provisionally set the relay block to the hood support rod.

  4. REMOVE BATTERY CLAMP SUB-ASSEMBLY


    1. Disengage the 2 wire harness clamps.

    2. A0135TU

      Remove the 3 bolts and battery clamp.

  5. SUPPORT MULTI-MODE MANUAL TRANSAXLE ASSEMBLY

  6. REMOVE TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR


    1. A0138IH

      Remove the 7 bolts and engine mounting insulator together with the engine mounting bracket.

  7. REMOVE BACK-UP LIGHT SWITCH ASSEMBLY

    A01372N

    1. Disconnect the back-up light switch connector.

    2. Separate the back-up light switch wire harness from the 2 clamps.

    3. A0136VLE01

      Using SST, remove the back-up light switch and gasket from the transaxle case.

      SST
      09817-16011