SHIFT PADDLE SWITCH INSPECTION


  1. INSPECT SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)


    1. A0136VKE02
      Text in Illustration
      *a

      Component without harness connected

      (Shift Paddle Switch LH (Transmission Shift Switch Assembly))
      *b

      Component without harness connected

      (Shift Paddle Switch RH (Transmission Shift Switch Assembly))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (SFTU) - 2 (ECC) Pull continuously "+" (up shift) Below 2.5 Ω
      Release "+" (up shift) 1 MΩ or higher
      2 (ECC) - 3 (SFTD) Pull continuously "-" (down shift) Below 2.5 Ω
      Release "-" (down shift) 1 MΩ or higher