SHIFT PADDLE SWITCH REMOVAL

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

  4. REMOVE STEERING PAD

    Click here

  5. REMOVE STEERING WHEEL ASSEMBLY

    A0138CJE01
    Text in Illustration
    *a Matchmark

    1. Remove the nut and place matchmarks on the steering wheel assembly and the steering main shaft.

    2. Using SST, remove the steering wheel assembly.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05021 )

  6. REMOVE NO. 1 SWITCH WIRE


    1. A013849

      Disengage the connector clamp from the steering wheel assembly.

    2. A0136EJ

      Disconnect the connector.

    3. Disengage the guide and separate the wire harness from the steering wheel assembly.

    4. A0138B7

      Disconnect the 2 connectors from the 2 shift paddle switches (transmission shift switch assembly) and remove the No. 1 switch wire.

  7. REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)


    1. A0136SV

      Remove the 4 screws, No. 1 switch bracket, No. 2 switch bracket and the 2 shift paddle switches (transmission shift switch assembly).