SHIFT STROKE SENSOR REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE BATTERY


    1. Loosen the nut and disconnect the battery positive (+) terminal.

    2. A0136L6

      Remove the bolt and the battery clamp.

    3. Remove the battery.

  3. SEPARATE ENGINE ROOM RELAY BLOCK

    A0138XK

    1. Remove the 2 bolts.

    2. Disengage the claw and separate the engine room relay block.

    3. A0138NO

      Disengage the 3 wire harness clamps.

    4. A0136C9

      Provisionally set the engine room relay block to the hood support rod.

  4. REMOVE BATTERY CLAMP SUB-ASSEMBLY


    1. A0135TU

      Remove the 3 bolts and the battery clamp sub-assembly.

  5. REMOVE SHIFT STROKE SENSOR

    A0136N5

    1. Disconnect the shift stroke sensor connector.

    2. Remove the 2 screws and the shift stroke sensor from the shift and select actuator.

    3. Remove the O-ring from the shift stroke sensor.