MULTI-MODE MANUAL TRANSAXLE OIL ON-VEHICLE INSPECTION


  1. INSPECT TRANSAXLE OIL

    A01361GE03

    1. Stop the vehicle on a level place.

    2. Remove the filler plug and gasket.

    3. Check that the oil surface is within 5 mm (0.20 in.) of the lowest position of the filler plug opening.

      Note


      • An excessively large or small amount of oil may cause problems.

      • After replacing the oil, drive the vehicle and check the oil level again.

    4. When the oil level is low, check for oil leakage.

    5. Install the filler plug and a new gasket.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }