Tech Tips
If a trouble codes is displayed during the DTC check, check the circuit indicated by the DTC. For details of each code, refer to the page for the respective "DTC No." in the DTC chart.
Inspect the "Fuse" and "Relay" before inspecting the suspected areas as shown in the chart below.
*1: Multi-mode Manual Transmission Warning Light
| DTC No. | Detection Item | Trouble Area | MIL | Warning Light (*1) |
Memory | See page |
|---|---|---|---|---|---|---|
| P0500 | Vehicle Speed Sensor "A" | 1. Open or short in speed signal circuit 2. Speed sensor (Brake control system) 3. Skid control computer (Brake control system) 4. Transmission control ECU |
- | Comes on | DTC stored | |
| P0562 | System Voltage | 1. Open or short in power source circuit 2. Transmission control ECU |
Comes on | Comes on | DTC stored | |
| P0603 | Internal Control Module Keep Alive Memory (KAM) Error | 1. Transmission control ECU | - | Comes on | DTC stored | |
| P0613 | TCM Processor | 1. Transmission control ECU | - | Comes on | - | |
| P0703 | Brake Switch "B" Circuit | 1. Open or short in STP or ST1- signal circuits 2. Stop light switch assembly 3. Transmission control ECU |
- | Comes on | DTC stored | |
| P0715 | Input / Turbine Speed Sensor Circuit Malfunction | 1. Open or short in transmission revolution sensor circuit 2. Transmission revolution sensor 3. Transmission control ECU |
- | Comes on | DTC stored | |
| P0725 | Engine Speed Input Circuit | 1. Open or short in NE signal circuit 2. Transmission control ECU 3. ECM |
- | Comes on | DTC stored | |
| P0806 | Clutch Position Sensor Circuit (Range / Performance) | 1. Clutch stroke sensor 2. Transmission control ECU |
- | Comes on | DTC stored | |
| P0807 | Clutch Position Sensor (Low) | 1. Clutch stroke sensor 2. Open or short in clutch stroke sensor circuit 3. Transmission control ECU |
Comes on | Comes on | DTC stored | |
| P0808 | Clutch Position Sensor (High) | 1. Clutch stroke sensor 2. Open or short in clutch stroke sensor circuit 3. Transmission control ECU |
Comes on | Comes on | DTC stored | |
| P0810 | Clutch Position Control Error | 1. Clutch stroke sensor 2. Clutch actuator assembly (clutch motor) 3. Transmission control ECU 4. Clutch mechanical system (clutch cover, clutch disc, release lever, release fork, release bearing) |
- | Comes on | DTC stored | |
| P0812 | Reverse Input Circuit | 1. Shift stroke sensor 2. Select stroke sensor 3. Back up light switch assembly 4. Open or short in back up light switch circuit 5. Transmission control ECU |
- | Comes on | DTC stored | |
| P0820 | Gear Lever "X-Y" Position Sensor Circuit | 1. Shift lever position sensor 2. Open or short in shift lever position signal circuit 3. Transmission control ECU |
- | Comes on | DTC stored | |
| P0821 | Gear Lever "X" Position Circuit | 1. Transmission shift main switch (built into shift lever assembly 2. Short in MDSW signal circuit 3. Transmission control ECU |
- | Comes on | DTC stored | |
| P0885 | TCM Power Relay Control Circuit (Open) | 1. AMT fuse 2. MMT relay 3. Open in MREL signal circuit 4. Open in PGND signal circuit 5. Opne in +BM signal circuit 6. Transmission control ECU |
- | Comes on | DTC stored | |
| P0887 | TCM Power Relay Control Circuit (Short) | 1. MMT relay 2. Short in MREL signal circuit 3. Short in PGND signal circuit 4. Short in +BM signal circuit 5. Transmission control ECU |
- | Comes on | DTC stored | |
| P0900 | Clutch Actuator Circuit | 1. Clutch actuator assembly (clutch motor) 2. Open or short in clutch motor circuit 3. Transmission control ECU |
- | Comes on | DTC stored | |
| P0905 | Gate Select Position Circuit (Range / Performance) | 1. Select stroke sensor 2. Transmission control ECU |
- | Comes on | DTC stored | |
| P0906 | Gate Select Position Circuit (Low) | 1. Select stroke sensor 2. Open or short in select stroke sensor circuit 3. Transmission control ECU |
Comes on | Comes on | DTC stored | |
| P0907 | Gate Select Position Circuit (High) | 1. Select stroke sensor 2. Open or short in select stroke sensor circuit 3. Transmission control ECU |
Comes on | Comes on | DTC stored | |
| P0909 | Gate Select Control Error | 1. Select stroke sensor 2. Shift and select stroke actuator assembly (select motor) 3. Transmission control ECU 4. Shift head or shift fork shaft |
- | Comes on | DTC stored | |
| P0910 | Gate Select Actuator Circuit | 1. Shift and select actuator assembly 2. Open or short in select motor circuit 3. Transmission control ECU |
- | Comes on | DTC stored | |
| P0915 | Gear Shift Position Circuit (Range / Performance) | 1. Shift stroke sensor 2. Transmission control ECU |
- | Comes on | DTC stored | |
| P0916 | Gear Shift Position Circuit (Low) | 1. Shift stroke sensor 2. Open or short in shift stroke sensor circuit 3. Transmission control ECU |
Comes on | Comes on | DTC stored | |
| P0917 | Gear Shift Position Circuit (High) | 1. Shift stroke sensor 2. Open or short in shift stroke sensor circuit 3. Transmission control ECU |
Comes on | Comes on | DTC stored | |
| P0919 | Gear Shift Position Control Error | 1. Shift stroke sensor 2. Shift and select stroke actuator assembly (shift motor) 3. Transmission control ECU 4. Transmission assembly |
- | Comes on | DTC stored | |
| P0920 | Gear Shift Forward Actuator Circuit | 1. Shift and select actuator assembly 2. Open or short in shift motor circuit 3. Transmission control ECU |
- | Comes on | DTC stored | |
| P1875 | Buzzer Malfunction | 1. Transmission control ECU | - | Comes on | DTC stored | |
| U0100 | Lost Communication with ECM/PCM "A" | 1. Open or short in CAN signal circuit 2. ECM 3. Transmission control ECU |
Comes on | Comes on | DTC stored |