SHIFT LEVER ASSEMBLY INSTALLATION


  1. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Connect the transmission control shift cable to the shift lever retainer.

    2. Connect the transmission control shift cable to the floor shift shift lever.

    3. Connect the transmission control select cable to the shift lever retainer.

    4. A0138X1

      Connect the transmission control select cable to the floor shift shift lever.

      Note


      • Connect the select cable point with the serrated part facing upwards.

      • Insert the clip in the orientation shown in the illustration.

  2. INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY


    1. Install the shift lever with the 4 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

    2. Engage the 2 clamps and install the wire harness.

  3. INSTALL CONSOLE BOX

    A01378KE01

    1. Engage the 2 claws and install the console box.

    2. Install the bolt <E>.

    3. Install the box bottom mat.

    4. Install the shift knob.

  4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY