SHIFT AND SELECT LEVER SHAFT DISASSEMBLY


  1. REMOVE LOCK BALL ASSEMBLY NO. 1

    A0136BH

    1. Remove lock ball No. 1 from the manual transmission case.

  2. REMOVE SHIFT AND SELECT LEVER SHAFT ASSEMBLY

    A0136GU

    1. Remove the 4 bolts and shift and select lever shaft from the transmission case.

    2. Remove the select return compression spring from the transmission case.

  3. REMOVE SHIFT LEVER INNER NO. 1


    1. A013874

      Using a pin punch and hammer, remove the shift lever inner No. 1 slotted pin from the shift and select lever shaft.

      Tech Tips

      Check the orientation of shift lever inner No. 1 before removing it.

    2. A0136FV

      Using 2 screwdrivers and a hammer, remove the snap ring from the shift and select lever shaft.

    3. A0136B2

      Remove shift lever inner No .1 and the shift interlock plate from the shift and select lever shaft.

  4. REMOVE SELECT RETURN COMPRESSION SPRING


    1. A0137I3

      Remove the select return compression spring from the shift and select lever shaft.

  5. REMOVE SELECT SPRING SEAT NO. 2


    1. A0137NK

      Remove select spring seat No. 2 from the shift and select lever shaft.

  6. REMOVE SELECT LEVER SHAFT


    1. A0136IM

      Remove the bolt.

    2. Remove the select lever shaft from the control shaft cover.

  7. REMOVE SELECT INNER LEVER

    A0137C5

    1. Remove the select inner lever from the control shaft cover.

  8. REMOVE SHIFT AND SELECT LEVER SHAFT

    A0136GIE01

    1. Using 2 screwdrivers and a hammer, remove the snap ring from the shift and select lever shaft.

      Tech Tips

      Lift the control shaft cover up with a piece of rope or equivalent to make the work easier.

    2. A0137E4

      Remove the shift and select lever shaft with the shift lever boot from the control shaft cover.

    3. Remove the shift lever boot from the shift and select lever shaft.

    4. A0138AZ

      Using a small screwdriver, remove the spacer from the shift and select lever shaft.

  9. REMOVE SELECT LEVER SHAFT OIL SEAL


    1. A01382P

      Using a screwdriver, remove the select lever shaft oil seal from the control shaft cover.

  10. REMOVE CONTROL SHAFT COVER OIL SEAL


    1. A0138R7

      Using a screwdriver, remove the control shaft cover oil seal from the control shaft cover.