SHIFT AND SELECT LEVER SHAFT DISASSEMBLY


  1. REMOVE INNER NO. 1 SHIFT LEVER


    1. A013874E01

      Using a pin punch 5 mm and a hammer, remove the slotted spring pin from the shift and select lever shaft.

      Tech Tips

      Check the orientation of the inner No. 1 shift lever.

    2. A0136FVE01

      Using 2 screwdrivers and a hammer, remove the snap ring from the shift and select lever shaft.

      Tech Tips

      Use a piece of cloth to prevent the snap ring from flying off.

    3. A0136B2

      Remove the inner No. 1 shift lever and the shift interlock plate from the shift and select lever shaft.

  2. REMOVE SELECT RETURN COMPRESSION SPRING


    1. A0137I3

      Remove the select return compression spring from the shift and select lever shaft.

  3. REMOVE NO. 2 SELECT SPRING SEAT


    1. A0137NK

      Remove the No. 2 select spring seat from the shift and select lever shaft.

  4. REMOVE SELECT LEVER SHAFT


    1. A0136IME01

      Remove the bolt and pull out the select lever shaft from the control shaft cover.

  5. REMOVE INNER SELECT LEVER


    1. A0137C5E01

      Remove the inner select lever from the control shaft cover.

  6. REMOVE SHIFT AND SELECT LEVER SHAFT


    1. A0136GIE02
      Text in Illustration
      *1 Rope

      Using 2 screwdrivers and a hammer, remove the snap ring from the shift and select lever shaft.

      Tech Tips


      • Lifting the control shaft cover up with a piece of rope or equivalent makes installation easier.

      • Use a piece of cloth to prevent the snap ring from flying off.

    2. A0137E4

      Remove the shift and select lever shaft with the shift lever boot from the control shaft cover.

    3. Remove the shift lever boot from the shift and select lever shaft.

  7. REMOVE CONTROL SHAFT COVER OIL SEAL


    1. A01376G

      Using a screwdriver with its tip wrapped with protective tape, pry out the control shaft cover oil seal from the control shaft cover.

  8. REMOVE SELECT LEVER SHAFT OIL SEAL


    1. A0138Z2

      Using a screwdriver with its tip wrapped with protective tape, pry out the select lever shaft oil seal from the control shaft cover.