CLUTCH PEDAL SWITCH INSTALLATION


  1. INSTALL CLUTCH SWITCH ASSEMBLY


    1. A0136HUE01

      Install the clutch switch with the nut.

      Torque:
      16 N*m  { 160 kgf*cm, 12 ft.*lbf }

      Note

      Insert the protrusion of the clutch switch into the hole in the pedal support.

    2. A013802E01

      With the clutch pedal released, check gap A of the clutch switch, as shown in the illustration.

      Clutch switch clearance A
      0.5 to 3.0 mm (0.0197 to 0.118 in.)

      If gap A is not as specified, adjust the clutch pedal height Click here.

    3. Connect the clutch switch connector.