GENERATOR REMOVAL

Note

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE FRONT BUMPER COVER

    Click here

  3. REMOVE ENGINE UNDER COVER AIR GUIDE

  4. REMOVE FAN AND GENERATOR V BELT


    1. A0138MFE01
      Text in Illustration
      *a No Measurable Clearance

      Loosen the A bolt.

    2. Loosen the B bolt.

    3. Loosely tighten the B bolt until there is no measurable clearance.

    4. Loosen the C bolt.

    5. Remove the fan and generator V belt.

  5. REMOVE GENERATOR ASSEMBLY


    1. A013629E01

      Remove the terminal cap.

    2. Remove the nut and disconnect the wire harness from terminal B.

    3. Remove the nut and disconnect the wire harness from terminal D.

    4. Remove the bolt and disconnect the wire harness clamp from generator.

    5. A0138RAE02

      Remove the 2 bolts and generator.