GENERATOR REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FRONT BUMPER COVER

    A0138CFE01

    1. Apply protective tape to the outer circumference of the front bumper cover, as shown in the illustration.

    2. Using a clip remover, remove the clip.

    3. Remove the 3 bolts, 5 screws and 2 clips.

    4. A01360O

      Disengage the 13 claws and remove the front bumper cover.

    5. A0136YZ

      Remove the 2 clips.

  3. REMOVE ENGINE UNDER COVER AIR GUIDE

    A0138W0

    1. Remove the 10 bolts and 2 screws.

    2. Disengage the 2 claws and remove the engine under cover air guide.

  4. REMOVE FAN & GENERATOR V BELT


    1. A013738E01

      Loosen the A bolt.

    2. Loosen the B bolt.

    3. Loosely tighten the B bolt until there is no measurable clearance.

    4. Loosen the C bolt.

    5. Remove the fan and generator V belt.

  5. REMOVE GENERATOR ASSEMBLY


    1. A013629E01

      Remove the terminal cap.

    2. Remove the nut and disconnect the wire harness from terminal B.

    3. Remove the nut and disconnect the wire harness from terminal D.

    4. Remove the bolt and disconnect the wire harness clamp from generator.

    5. A0138RAE01

      Remove the 2 bolts and generator.