OIL FILTER REPLACEMENT

Note


  • Prolonged and repeated contact with engine oil will result in the removal of natural oils from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.

  • Precautions should be taken when replacing engine oil to minimize the risk of your skin making contact with used engine oil. Protective clothing and gloves that cannot be penetrated by oil should be worn. The skin should be washed with soap and water, or water-less hand cleaner to remove any used engine oil thoroughly. Do not use gasoline, thinners, or solvents.

  • In order to preserve the environment, used oil and used oil filters must be disposed of at designated disposal sites.


  1. REMOVE ENGINE UNDER COVER NO.1


    1. Remove the engine cover No.1.

  2. DRAIN ENGINE OIL


    1. Remove the oil filler cap.

    2. Remove the oil drain plug, and drain the engine oil from the oil pan.

    3. Install a new gasket and the drain plug.

      Torque:
      35 N*m  { 357 kgf*cm, 26 ft.*lbf }

  3. REMOVE INLET AIR CLEANER


    1. A0137J3E01

      Separate the clip to remove the front air intake hose.

  4. REMOVE OIL FILTER ELEMENT


    1. A013769E01

      Remove the oil filter element protection cover.

    2. Remove the oil filter element.

    3. Remove the O-ring from the oil filter element protection cover.

  5. INSTALL OIL FILTER ELEMENT


    1. A0136R9E01

      Align the (A) part with the (B) part, and install a new oil filter element.

    2. Install a new O-ring to the oil filter element protection cover.

    3. Install the oil filter element protection cover.

      Torque:
      25 N*m  { 255 kgf*cm, 18 ft.*lbf }

  6. INSTALL INLET AIR CLEANER


    1. A0137J3E01

      Install the front air intake hose.

  7. ADD ENGINE OIL


    1. Add the engine oil.

      Standard capacity
      Item Capacity
      Drain and refill with oil filter change 3.8 liters (4.0 US qts, 3.3 Imp.qts)
      Drain and refill without oil filter change 3.4 liters (3.6 US qts, 3.0 Imp.qts)

  8. INSTALL ENGINE UNDER COVER NO.1


    1. Install the engine cover No.1.