FUEL PRESSURE PULSATION DAMPER INSTALLATION


  1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY


    1. A01372QE01

      Apply a light coat of spindle oil or gasoline to a new O-ring and install it to the fuel pressure pulsation damper.

    2. Install the fuel pressure pulsation damper to the fuel delivery pipe.

    3. Install the clip.

  2. INSTALL AIR CLEANER CAP SUB-ASSEMBLY


    1. A0137CCE02

      Install the air cleaner and air cleaner cap with the clamps.

    2. Tighten the 4 clamps.

  3. CHECK FOR FUEL LEAKS


    1. When using the intelligent tester.


      1. Connect the intelligent tester to the DLC3.

      2. Turn the ignition switch to the ON position and intelligent tester main switch on.

        Note

        Do not start the engine.

      3. Select the Active Test mode on the intelligent tester.

        Tech Tips

        Refer to the intelligent tester operator's manual for further details.

    2. Check that there are no fuel leaks anywhere on the fuel system after doing maintenance.