DRIVE BELT INSTALLATION


  1. INSTALL FAN AND GENERATOR V BELT


    1. A013738E02
      Text in Illustration
      *1 Generator Pulley
      *2 Idle Pulley
      *3 Compressor Pulley
      *4 Crankshaft Pulley
      *a No Measurable Clearance
      *b Specified Point
      *c w/ Air Conditioning System
      *d w/o Air Conditioning System

      Install the fan and generator V belt.

    2. Loosely tighten the B bolt until there is no measurable clearance.

    3. Turn the C bolt to adjust tension of the fan and generator V belt. Click here

    4. Inspect the fan and generator V belt.

    5. Tighten the B bolt.

      Torque:
      34 N*m  { 347 kgf*cm, 25 ft.*lbf }

    6. Tighten the A bolt.

      Torque:
      49 N*m  { 500 kgf*cm, 36 ft.*lbf }

    7. Visually check the generator wiring and listen for abnormal noise.

  2. INSTALL FRONT BUMPER COVER

    Click here