ECM INSTALLATION


  1. INSTALL ECM


    1. Install the ECM with the 2 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
    2. A0137ONE02

      Connect the 3 ECM connectors.

      Note


      • Check the ECM and the area around the ECM for water or dirt. Clean them as necessary.

      • Check the connection of the removed ECM connector for water or dirt. Clean it as necessary.

    3. A0137UFE02

      Turn the retainers and securely lock the 3 connectors.

  2. INSTALL ENGINE ROOM RELAY BLOCK (for RHD)


    1. A0136JUE04

      Connect the engine room relay block with the clamp.

    2. Install the engine room relay block with the 2 bolts.

      Torque:
      Bolt A
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }
      Bolt B
      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }
    3. A0136CAE02

      Install the relay block cover upper.

  3. INSTALL COWL TOP PANEL OUTER


    1. A0136J7

      Install the cowl top panel outer with the 10 bolts.

      Torque:
      9.2 N*m  { 94 kgf*cm, 81 in.*lbf }

  4. INSTALL FRONT WIPER MOTOR AND LINK ASSEMBLY


    1. Connect the connector.

    2. A0136OQ

      Install the front wiper motor and link assembly with the 2 bolts.

      Torque:
      13 N*m  { 127 kgf*cm, 9 ft.*lbf }

  5. INSTALL COWL TOP VENTILATOR LOUVER RH


    1. Connect the washer hose.

    2. A0136GYE01

      Engage the 8 claws and install the cowl top ventilator louver RH.

    3. Install the clip.

  6. INSTALL COWL TOP VENTILATOR LOUVER LH


    1. Connect the washer hose.

    2. A0136Y2E01

      Engage the 9 claws and install the cowl top ventilator louver LH.

    3. Install the clip.

  7. INSTALL HOOD TO COWL TOP SEAL

    A01379NE01

    1. Engage the 8 clips and install the hood to cowl top seal.

  8. INSTALL FRONT WIPER ARM LH

    A01390ME03

    1. Scrape any metal powder off the serrated part of the wiper arm with a round file or equivalent (when reinstalling).

    2. Clean the wiper pivot serrations with a wire brush.

    3. Operate the wiper, then stop the windshield wiper motor assembly in the automatic stop position.

    4. Provisionally install the front wiper main arm with the nut.

    5. Install the front wiper secondary arm onto the front wiper motor and link assembly.

    6. A0138WNE04

      Align the blade tip with the mark on the windshield glass, as shown in the illustration.

    7. Tighten the nut of the front wiper main arm.

      Torque:
      21 N*m  { 209 kgf*cm, 15 ft.*lbf }

  9. INSTALL BATTERY (for RHD)


    1. A01382G

      Install the battery and clamp with the bolt.

      Torque:
      15 N*m  { 154 kgf*cm, 11 ft.*lbf }

    2. Connect the positive battery cable.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for LHD)

  11. INSTALL FRONT WIPER ARM HEAD CAP

    A0137M4

    1. Engage the claw and install the front wiper arm head cap.

  12. PERFORM VARIANT CODING

    Tech Tips

    Click here