DIESEL THROTTLE BODY REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE ENGINE COVER


    1. A0138OOE01

      Disengage the 3 claws and remove the engine cover.

  3. REMOVE AIR HOSE


    1. A0137HDE03

      Loosen the clamp bolt.

    2. Using a screwdriver and pliers, remove the clip.

    3. Remove the air hose.

  4. REMOVE INTAKE AIR RESONATOR


    1. A01390W

      Disconnect and remove the water reservoir tube from the intake air resonator.

    2. A0138YRE02

      Disconnect the turbocharger air temperature sensor connector and loosen the clamp.

    3. Remove the bolt.

    4. Using a "torx" socket wrench, remove the screw.

    5. A0135Z7E02

      Turn the intake air resonator, and remove the intake air resonator as shown in the illustration.

    6. Remove the O-ring from the intake air resonator.

  5. REMOVE THROTTLE VALVE (FOR EGR)


    1. A0135W6

      Remove the throttle valve connector.

    2. A0135U9

      Using a "torx" socket wrench, remove the 3 screws and the throttle valve.

    3. Remove the O-ring from the throttle valve.