MANIFOLD ABSOLUTE PRESSURE SENSOR (w/ Electronic Throttle Control System) REMOVAL


  1. REMOVE FRONT WIPER ARM HEAD CAP


    1. Remove the front wiper arm head cap Click here.

  2. REMOVE FRONT WIPER ARM LH


    1. Remove the front wiper arm LH Click here.

  3. REMOVE HOOD TO COWL TOP SEAL

    A01379NE01

    1. Disengage the 8 clips and remove the hood to cowl top seal.

  4. REMOVE COWL TOP VENTILATOR LOUVER LH

    A0136Y2E01

    1. Remove the clip.

    2. Disengage the 9 claws and remove the cowl top ventilator louver LH.

    3. Disconnect the washer hose.

  5. REMOVE COWL TOP VENTILATOR LOUVER RH

    A0136GYE01

    1. Remove the clip.

    2. Disengage the 8 claws and remove the cowl top ventilator louver RH.

    3. Disconnect the washer hose.

  6. REMOVE FRONT WIPER MOTOR AND LINK ASSEMBLY

    A0136OQ

    1. Remove the 2 bolts.

    2. Disconnect the connector and remove the front wiper motor and link assembly.

  7. REMOVE COWL TOP PANEL OUTER


    1. A0138B1

      Remove the 10 bolts and cowl top panel outer.

  8. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  9. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    1. A0138QS

      Remove the 4 clamps.

    2. Remove the 2 clamps, then remove the air cleaner cap and air cleaner filter element.

  10. REMOVE THROTTLE BODY ASSEMBLY


    1. A0138QFE01

      Separate the clamps, disconnect the throttle motor connector.

    2. Loosen the 2 clips and disconnect the 2 water by-pass hoses.

    3. A01385I

      Remove the 4 bolts and throttle body.

  11. REMOVE THROTTLE BODY GASKET


    1. A0137VHE01

      Remove the gasket from the intake manifold.

  12. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR


    1. A01383R

      Disconnect the manifold absolute pressure sensor connector.

    2. Remove the 2 screws and manifold absolute pressure sensor.