MANIFOLD ABSOLUTE PRESSURE SENSOR INSTALLATION


  1. INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR


    1. A0137FCE02

      Install the manifold absolute pressure sensor with 2 screws.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    2. Connect the manifold absolute pressure sensor connector.

  2. INSTALL AIR CLEANER CAP SUB-ASSEMBLY


    1. A0137CCE02

      Install the air cleaner and air cleaner cap with the clamps.

    2. Tighten the 4 clamps.

  3. INSTALL COWL TOP PANEL OUTER


    1. Install the cowl top panel outer with the 10 bolts.

      Torque:
      9.2 N*m  { 94 kgf*cm, 81 in.*lbf }

    2. Engage the grommet and install the wire harness.

    3. Engage the wire harness clamp.

  4. INSTALL FRONT NO. 1 VENTILATOR SEAL


    1. Install the No. 1 ventilator seal with the 2 clips.

  5. INSTALL FRONT AIR SHUTTER SEAL RH


    1. Install the front air shutter seal RH the 2 clips.

  6. INSTALL FRONT WIPER MOTOR AND LINK ASSEMBLY

    Click here