MANIFOLD ABSOLUTE PRESSURE SENSOR REMOVAL


  1. REMOVE FRONT WIPER MOTOR AND LINK ASSEMBLY

    Click here

  2. REMOVE FRONT AIR SHUTTER SEAL RH

    A013795

    1. Remove the 2 clips and front air shutter seal RH.

  3. REMOVE FRONT NO. 1 VENTILATOR SEAL

    A0137ZX

    1. Remove the 2 clips and No. 1 front ventilator seal.

  4. REMOVE COWL TOP PANEL OUTER

    A01392T

    1. Disengage the wire harness clamp.

    2. Disengage the grommet and separate the wire harness.

    3. A0137JB

      Remove the 10 bolts and cowl top panel outer.

  5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    1. A0137CCE01

      Remove the 4 clamps.

    2. Remove the 2 clamps, then remove the air cleaner cap and air cleaner filter element.

  6. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR


    1. A0137FCE01

      Disconnect the manifold absolute pressure sensor connector.

    2. Remove the 2 screws and manifold absolute pressure sensor.