KNOCK SENSOR REMOVAL


  1. REMOVE FRONT WIPER MOTOR AND LINK ASSEMBLY

    Click here

  2. REMOVE FRONT AIR SHUTTER SEAL RH

    A013795

    1. Remove the 2 clips and front air shutter seal RH.

  3. REMOVE FRONT NO. 1 VENTILATOR SEAL

    A0137ZX

    1. Remove the 2 clips and No. 1 front ventilator seal.

  4. REMOVE COWL TOP PANEL OUTER

    A01392T

    1. Disengage the wire harness clamp.

    2. Disengage the grommet and separate the wire harness.

    3. A0137JB

      Remove the 10 bolts and cowl top panel outer.

  5. REMOVE OIL LEVEL GAUGE GUIDE


    1. A0138GBE01

      Remove the 2 wire harness clamps from the oil level gauge guide.

    2. Remove the bolt and oil level gauge guide.

  6. REMOVE KNOCK CONTROL SENSOR


    1. Disconnect the knock control sensor connector.

    2. A013640E01

      Remove the bolt and knock control sensor.