THROTTLE BODY (w/ Electronic Throttle Control System) INSTALLATION


  1. INSTALL THROTTLE BODY GASKET


    1. A0137VHE01

      Install a new gasket on the intake manifold.

  2. INSTALL THROTTLE BODY ASSEMBLY


    1. A01385I

      Install the throttle body with the 4 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }
    2. A0138QFE02

      Connect the 2 water by-pass hoses with the 2 clips.

    3. Connect the throttle motor connector, install the wire harness with the clamp.

  3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY


    1. A0138QS

      Install the air cleaner element and air cleaner cap with the clamps.

    2. Tightn the 4 clamps.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  5. PERFORM INITIALIZATION

    Tech Tips

    Click here