ACCELERATOR PEDAL ROD (w/ Electronic Throttle Control System) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE ACCELERATOR PEDAL ROD ASSEMBLY


    1. Disconnect the accelerator pedal position sensor connector.

    2. A0138JVE01

      Remove the 3 bolts and accelerator pedal. (for LHD)

    3. Remove the 2 nuts and accelerator pedal. (for RHD)

      Note


      • Do not drop or strike the accelerator pedal.

      • Do not disassemble the accelerator pedal.