DESCRIPTION
This DTC will be output if electronic throttle learning is not completed after the electronic throttle has bee replaced or repaired, or the ECM has bee replaced.
| DTC No. | Detecting Condition | Trouble Area |
|---|---|---|
| P1127 | Electronic throttle learning is not completed since any of the leaning condition is not met. (1 trip detection logic) |
- |
INSPECTION PROCEDURE
PROCEDURE
CHECK OUTPUT DTC
Connect the intelligent tester of the DLC3.
Turn the ignition switch ON.
Turn the tester ON.
Enter the following menus: Power train / Engine / DTC.
Read the DTCs.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
GO TO DTC CHART |
| A |
|
PERFORM ELECTRONIC THROTTLE LEARNING