DESCRIPTION
The throttle actuator is operated by the ECM, and opens and closes the throttle valve using gears. The opening angle of the throttle valve is detected by the Throttle Position (TP) sensor, which is mounted on the throttle body. The TP sensor provides feedback to the ECM in order that it can control the throttle actuator, and therefore the throttle valve appropriately in response to driver inputs.
Tech Tips
This ETCS (Electronic Throttle Control System) does not use a throttle cable.
| DTC No. | DTC Detection Condition | Trouble Aria |
|---|---|---|
| P2119 | After P2112 is diagnosed, when the throttle does not quickly close after the current to the throttle motor is cut off. (1 trip detection logic) |
Throttle body assembly |
Tech Tips
Detection for P2119 is performed during electronic throttle learning.
INSPECTION PROCEDURE
Tech Tips
Read freeze frame data using the intelligent tester. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air-fuel ratio was lean or rich, and other data, from the time the malfunction occurred.
PROCEDURE
CHECK THROTTLE BODY ASSEMBLY (VISUALLY CHECK THROTTLE VALVE)
Check for contamination between the throttle valve and the housing and throttle valve moves smoothly.
| NG |
|
CLEAN THROTTLE BODY |
| OK |
|
REPLACE THROTTLE BODY ASSEMBLY
Replace the throttle body assembly Click here.
Perform electronic throttle learning Click here.
| NEXT |
|
CHECK IF DTC OUTPUT RECURS