| Pedal height from floor panel | LHD RHD |
134.9 to 144.9 mm (5.311 to 5.705 in.) 161.1 to 171.1 mm (6.343 to 6.736 in.) |
| Pedal free play | - | 18 to 28 mm (0.709 to 1.102 in.) |
| Clutch release point from pedal stroke end position to release point | Standard | 20 mm (0.787 in.) or more |
| Pedal stroke | - | 148 mm (5.827 in.) |
| Disc rivet head depth | Maximum | 0.3 mm (0.012 in.) |
| Disc runout | Maximum | 0.8 mm (0.031 in.) |
| Diaphragm spring wear | Maximum depth Maximum width |
0.5 mm (0.020 in.) 6.0 mm (0.236 in.) |
| Flywheel runout | Maximum | 0.1 mm (0.004 in.) |
| Diaphragm spring tip-non alignment | Maximum | 0.5 mm (0.0197 in.) |
| Clutch switch resistance | ON (pushed in) | Below 1Ω |
| OFF (released) | 10 kΩ or higher | |
| Clutch switch clearance | Standard | 0.5 to 3.0 mm (0.0197 to 0.118 in.) |
| Pedal height from floor panel | LHD RHD |
134.9 to 144.9 mm (5.311 to 5.705 in.) 161.1 to 171.1 mm (6.343 to 6.736 in.) |
| Pedal free play | - | 18 to 28 mm (0.709 to 1.102 in.) |
| Clutch release point from pedal stroke end position to release point | Standard | 20 mm (0.787 in.) or more |
| Pedal stroke | - | 148 mm (5.827 in.) |
| Disc rivet head depth | Maximum | 0.3 mm (0.012 in.) |
| Disc runout | Maximum | 0.8 mm (0.031 in.) |
| Diaphragm spring wear | Maximum depth Maximum width |
0.5 mm (0.020 in.) 6.0 mm (0.236 in.) |
| Flywheel runout | Maximum | 0.1 mm (0.004 in.) |
| Diaphragm spring tip-non alignment | Maximum | 0.5 mm (0.0197 in.) |
| Pedal height from floor panel | LHD RHD |
134.9 to 144.9 mm (5.311 to 5.705 in.) 161.1 to 171.1 mm (6.343 to 6.736 in.) |
| Pedal free play | - | 18 to 28 mm (0.709 to 1.102 in.) |
| Clutch release point from pedal stroke end position to release point | Standard | 20 mm (0.787 in.) or more |
| Pedal stroke | - | 148 mm (5.827 in.) |
| Disc rivet head depth | Maximum | 0.3 mm (0.012 in.) |
| Disc runout | Maximum | 0.8 mm (0.031 in.) |
| Diaphragm spring wear | Maximum depth Maximum width |
0.5 mm (0.020 in.) 6.0 mm (0.236 in.) |
| Flywheel runout | Maximum | 0.1 mm (0.004 in.) |
| Diaphragm spring tip-non alignment | Maximum | 0.5 mm (0.0197 in.) |
| Disc rivet head depth | Maximum | 0.3 mm (0.012 in.) |
| Disc runout | Maximum | 0.8 mm (0.031 in.) |
| Diaphragm spring wear | Maximum depth Maximum width |
0.6 mm (0.024 in.) 5.0 mm (0.197 in.) |
| Flywheel runout | Maximum | 0.1 mm (0.004 in.) |
| Diaphragm spring tip-non alignment | Maximum | 0.5 mm (0.0197 in.) |
| Clutch actuator | Resistance | 0.1 to 100 Ω |