РЫЧАГ ПЕРЕКЛЮЧЕНИЯ ПЕРЕДАЧ В СБОРЕ РАЗБОРКА

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE POSITION INDICATOR LIGHT BULB


    1. A01BGAA

      Rotate the wire socket counterclockwise to align the wire socket with the key part of the lower position indicator housing and remove the wire socket.

    2. Detach the guide and disconnect the wire from the shift lock control unit assembly.

    3. A01BEIU

      Remove the position indicator light cap and position indicator light bulb.

  2. REMOVE LOWER POSITION INDICATOR HOUSING


    1. A01BEGAE01
      Text in Illustration
      *a Hook

      Detach the 2 claws and remove the lower position indicator housing from the shift lock control unit assembly.

      Note

      Raise up the side with the claws to prevent the hook from becoming damaged.

  3. REMOVE POSITION INDICATOR SLIDE COVER


    1. A01BGT0

      Remove the position indicator slide cover together with No. 2 position indicator slide cover from the lower position indicator housing.

    2. A01BDCT

      Remove the No. 2 position indicator slide cover from the position indicator slide cover.

  4. REMOVE SHIFT LOCK CONTROL ECU


    1. A01BDJW

      Disconnect the shift lock solenoid connector from the shift lock control ECU.

    2. Detach the 3 claws and remove the shift lock control ECU from the shift lock control unit assembly.