МАСЛЯНЫЙ НАСОС ПРОВЕРКА


  1. INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY


    1. A01BHP3

      Using a dial indicator, measure the inside diameter of the oil pump body bushing.

      Maximum inside diameter
      38.19 mm (1.5035 in.)

      If the inside diameter is greater than the maximum, replace the oil pump body.

  2. INSPECT STATOR SHAFT ASSEMBLY


    1. A01BBYZ

      Using a dial indicator, measure the inside diameter of the stator shaft bushing.

      Maximum inside diameter
      Front side
      21.58 mm (0.8496 in.)
      Rear side:
      27.08 mm (1.0661 in.)

      If the inside diameter is grater than the maximum, replace the stator shaft.

  3. INSPECT CLEARANCE OF OIL PUMP ASSEMBLY


    1. A01BECE

      Using a feeler gauge, measure the clearance.

      Standard body clearance
      0.07 to 0.15 mm (0.0028 to 0.0059 in.)
      Maximum body clearance
      0.2 mm (0.0079 in.)

      If the body clearance is greater than the maximum, replace the drive gear, the driven gear or the pump body.

    2. A01BB4F

      Using a feeler gauge, measure the clearance between the driven gear teeth and the crescent shaped part of the pump body.

      Standard tip clearance
      0.004 to 0.248 mm (0.0002 to 0.0098 in.)
      Maximum tip clearance
      0.3 mm (0.012 in.)

      If the tip clearance is greater than the maximum, replace the drive gear, the driven gear or the pump body.

    3. A01BFED

      Using a steel straight edge and a feeler gauge, measure the side clearance of both gears.

      Standard side clearance
      0.02 to 0.05 mm (0.0008 to 0.0020 in.)
      Maximum side clearance
      0.1 mm (0.004 in.)
    4. There are 5 different thickness for drive and driven gears.

      Drive and driven gears thickness: mm (in.)
      Mark Thickness
      F 10.690 to 10.699 (0.4209 to 0.4212)
      G 10.700 to 10.709 (0.4213 to 0.4216)
      H 10.710 to 10.720 (0.4217 to 0.4220)
      J 10.721 to 10.730 (0.4221 to 0.4224)
      K 10.731 to 10.740 (0.4225 to 0.4228)

      If the side clearance is greater than the maximum, replace the drive gear, the driven gear or the pump body.

  4. INSPECT OIL PUMP DRIVE GEAR ROTATION


    1. A01BHQT

      Make sure the drive gear rotates smoothly.

    2. Remove the oil pump assembly from the torque converter clutch.