ДАТЧИК ПОЛОЖЕНИЯ ПАРКИНГА / НЕЙТРАЛИ СНЯТИЕ


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Set the shift lever to the neutral position.

    2. A01BDE0E01

      Remove the nut from the control shaft lever.

    3. Remove the clip and disconnect the control cable from the control cable bracket.

  3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01BHSTE01

      Disconnect the park/neutral position switch connector.

    2. A01BFAPE03

      Using a screwdriver, pry out the lock washer.

    3. Remove the lock nut and lock washer.

    4. A01BAP6

      Remove the bolt and park/neutral position switch.