Click here

СИСТЕМА БЛОКИРОВКИ СЕЛЕКТОРА ПРОВЕРКА БЕЗ СНЯТИЯ С АВТОМОБИЛЯ

Click here
Click here
  1. Click here

    INSPECT SHIFT LOCK CONTROL UNIT ASSEMBLY


    1. A01BC3JE01

      Disconnect the transmission control switch connector of shift lock control unit assembly.

    2. Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.

      Table 1. Resistance:
      Shift position Tester connection Specified condition
      D 9 - 2 (NSSD - ATD) Below 1 Ω
      3 10 kΩ or higher
      D 9 - 3 (NSSD - AT3) Below 1 Ω
      3 10 kΩ or higher