КОРПУС КЛАПАНОВ В СБОРЕ ПРОВЕРКА


  1. INSPECT SHIFT SOLENOID VALVE S1


    1. A01BDE2E01

      Remove the shift solenoid valve S1.

    2. Measure the resistance according to the value(s) in the table below.

      Resistance:
      Tester Connection Specified Condition 20°C (68°F)
      Solenoid Connector (S1) - Solenoid Body (S1) 11 to 15 Ω

    3. Connect the positive (+) lead to the terminal of the solenoid connector, and the negative (-) lead to the solenoid body.

      OK
      The solenoid makes an operating sound.

  2. INSPECT SHIFT SOLENOID VALVE S2


    1. A01BDE2E02

      Remove the shift solenoid valve S2.

    2. Measure the resistance according to the value(s) in the table below.

      Resistance:
      Tester Connection Specified Condition 20°C (68°F)
      Solenoid Connector (S2) - Solenoid Body (S2) 11 to 15 Ω

    3. Connect the positive (+) lead to the terminal of the solenoid connector, and the negative (-) lead to the solenoid body.

      OK
      The solenoid makes an operating sound.

  3. INSPECT SHIFT SOLENOID VALVE SLT


    1. A01BBTUE27

      Remove the shift solenoid valve (SLT).

    2. Measure the resistance according to the value(s) in the table below.

      Resistance:
      Tester Connection Specified Condition 20°C (68°F)
      1 - 2 5.0 to 5.6 Ω

    3. Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, then check the movement of the valve.

      OK
      The solenoid makes an operating sound.