Click here

СИСТЕМА АВТОМАТИЧЕСКОЙ ТРАНСМИССИИ С ЭЛЕКТРОННЫМ УПРАВЛЕНИЕМ ПРОВЕРКА РУЧНОГО ПЕРЕКЛЮЧЕНИЯ ПЕРЕДАЧ

Click here
Click here
Click here

  1. PERFORM MANUAL SHIFTING TEST

    Tip:

    • With this test, it can be determined whether the trouble occurs in the electrical circuit or is a mechanical problem in the transmission.

    • If any abnormalities are found in the following test, the problem is in the transmission itself.


    1. A01BCSL

      Disconnect the connector of the transmission wire.

    2. Inspect the manual driving operation.

      Check that the shift and gear positions correspond to the table below.

      While driving, shift through the L, 2, 3 and D positions. Check that the gear change corresponds to the shift position.

      Shift Position Gear Position
      D O/D
      3 O/D
      2 3rd
      L 1st
      R Reverse
      P Pawl Lock
      Tip:

      If the gear positions of the L, 2, 3 and D are difficult to distinguish, do the following road test (Click here).

      If any abnormality is found in the above test, the problem is in the transmission itself.

    3. Connect the transmission wire connector.

    4. Clear the DTC (Click here).