Click here

КОРПУС КЛАПАНОВ В СБОРЕ УСТАНОВКА

Click here
Click here
  1. Click here

    INSTALL TRANSMISSION VALVE BODY ASSEMBLY


    1. A01BG6R

      Align the groove of the manual valve with the pin of the manual valve lever.

    2. A01BAYHE01

      Install the transmission valve body assembly with the 17 bolts.

      9.8 N*m 100 kgf*cm 87 in.*lbf
      Tip:

      Each bolt length is indicated below.

      Bolt A: 28 mm (1.10 in.)

      Bolt B: 30 mm (1.18 in.)

      Bolt C: 36 mm (1.42 in.)

      Bolt D: 45 mm (1.77 in.)

  2. Click here

    INSTALL OVERDRIVE BRAKE TUBE


    1. Using a plastic-faced hammer, tap in the overdrive brake tube.

      Note:

      Be careful not to bend or damage the tube.

  3. Click here

    INSTALL VALVE BODY OIL STRAINER ASSEMBLY


    1. Install 3 new gaskets to the valve body oil strainer assembly.

    2. Install the valve body oil strainer assembly with the 3 bolts.

      5.4 N*m 55 kgf*cm 48 in.*lbf
  4. Click here

    CONNECT TRANSMISSION WIRE

    (Click here)