Click here

ДАТЧИК ПОЛОЖЕНИЯ ПАРКИНГА / НЕЙТРАЛИ СНЯТИЕ

Click here
Click here
  1. Click here

    REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01BHHM

      Disconnect the connector.

    2. A01BBOSE01

      Using a screwdriver, bend the tabs of the lock washer.

      Note:

      Be careful not to damage the park/neutral position switch assembly.

      Tip:

      Tape the screwdriver tip before use.

    3. Remove the nut and lock washer.

    4. Remove the bolt and park/neutral position switch assembly.

      Tip:

      Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch assembly as the detent spring may become detached from the manual valve lever shaft.