ДАТЧИК ЧАСТОТЫ ВРАЩЕНИЯ УСТАНОВКА


  1. INSTALL SPEED SENSOR SP2


    1. Coat a new O-ring with ATF and install it to the speed sensor SP2.

    2. Install the speed sensor SP2 with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    3. Connect the connector.

  2. INSTALL SPEED SENSOR NC0


    1. Coat a new O-ring with ATF and install it to the speed sensor NC0.

    2. Clean the bolt and bolt hole.

    3. Apply adhesive to 2 or 3 threads on the end of the bolt.

      Adhesive
      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

    4. Install the speed sensor NC0 with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    5. Connect the connector.