ЗАДНИЙ САЛЬНИК УДЛИНИТЕЛЯ КАРТЕРА ТРАНСМИССИИ ЗАМЕНА


  1. DRAIN AUTOMATIC TRANSMISSION FLUID


    1. A01BDHI

      Remove the drain plug and gasket, and drain the ATF.

    2. Install a new gasket and the drain plug.

      Torque:
      20 N*m  { 205 kgf*cm, 15 ft.*lbf }

  2. REMOVE PROPELLER SHAFT ASSEMBLY

    Click here

  3. REMOVE EXTENSION HOUSING REAR OIL SEAL


    1. A01BD7SE01

      Using SST, remove the extension housing rear oil seal together with the dust seal and retainer.

      SST
      09308-10010

  4. INSTALL EXTENSION HOUSING REAR OIL SEAL


    1. Coat the lip of a new extension housing rear oil seal with MP grease.

    2. A01BCT4E01

      Using SST and a hammer, tap in the extension housing rear oil seal.

      SST
      09309-37010
      Standard depth
      6.2 to 6.8 mm (0.245 to 0.267 in.)

      Note

      Be careful not to damage the lip of the extension housing rear oil seal.

    3. Install a new dust seal to a new retainer.

    4. A01BDARE01

      Using SST and a hammer, tap in the dust seal together with the retainer.

      SST
      09309-37010
      Standard distance
      0.7 to 1.3 mm (0.0276 to 0.0511 in.)

  5. INSTALL PROPELLER SHAFT ASSEMBLY

    Click here

  6. ADD AUTOMATIC TRANSMISSION FLUID

    Fluid type
    Toyota Genuine ATF Type T-IV

  7. CHECK AUTOMATIC TRANSMISSION FLUID LEVEL

    Click here