Tech Tips
If a DTC is output during the DTC check, check the parts listed in the table below and proceed to the "See page" given.
*1: "Comes on" means the Malfunction Indicator Lamp (MIL) illuminates.
*2: "DTC stored" means the ECM stores the trouble code if the ECM detects the DTC detection condition.
These DTCs may be output when the clutches, brakes, gear components, etc. inside the automatic transmission are damaged.
| DTC Code | Detection Item | MIL*1 | Memory*2 | See page |
|---|---|---|---|---|
| P0705 | Transmission Range Sensor Circuit Malfunction (PRNDL Input) | Comes on | DTC stored | |
| P0712 | Transmission Fluid Temperature Sensor "A" Circuit Low Input | Comes on | DTC stored | |
| P0713 | Transmission Fluid Temperature Sensor "A" Circuit High Input | Comes on | DTC stored | |
| P0717 | Turbine Speed Sensor Circuit No Signal | Comes on | DTC stored | |
| P0722 | Output Speed Sensor Circuit No Signal | Comes on | DTC stored | |
| P0973 | Shift Solenoid "A" Control Circuit Low (Shift Solenoid Valve S1) | Comes on | DTC stored | |
| P0974 | Shift Solenoid "A" Control Circuit High (Shift Solenoid Valve S1) | Comes on | DTC stored | |
| P0976 | Shift Solenoid "B" Control Circuit Low (Shift Solenoid Valve S2) | Comes on | DTC stored | |
| P0977 | Shift Solenoid "B" Control Circuit High (Shift Solenoid Valve S2) | Comes on | DTC stored | |
| P2716 | Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT) | Comes on | DTC stored | |
| P2769 | Torque Converter Clutch Solenoid Circuit Low (Shift Solenoid Valve SL) | Comes on | DTC stored | |
| P2770 | Torque Converter Clutch Solenoid Circuit High (Shift Solenoid Valve SL) | Comes on | DTC stored |