Click here

ГЕНЕРАТОР УСТАНОВКА

Click here
Click here
  1. Click here

    INSTALL VACUUM PUMP ASSEMBLY


    1. Align the matchmarks and install the vacuum pump assembly with the 4 bolts.

      7.8 N*m 80 kgf*cm 69 in.*lbf
  2. Click here

    INSTALL GENERATOR W/ VACUUM PUMP ASSEMBLY


    1. A01BCCL

      Temporarily install the generator with the bolt (lower side).

      65 N*m 663 kgf*cm 48 ft.*lbf

    2. Connect the vacuum pump oil inlet hose with a new gasket and the union bolt.

      14 N*m 140 kgf*cm 10 ft.*lbf

    3. Connect the oil outlet hose.

    4. Connect the vacuum hose.

    5. A01BGYE

      Connect the connector.

    6. Connect the +B terminal wire with the nut.

      9.8 N*m 100 kgf*cm 87 in.*lbf

    7. Install the terminal cover.

  3. Click here

    INSTALL COMPRESSOR MOUNTING BRACKET (w/ Air Conditioning System)


    1. Temporarily install the compressor mounting bracket with the 3 bolts.

    2. A01BDQD

      Using several steps, uniformly install and tighten the 3 bolts in the sequence order is as shown in the illustration.

      47 N*m 475 kgf*cm 36 ft.*lbf
  4. Click here

    INSTALL COMPRESSOR AND MAGNETIC CLUTCH (w/ Air Conditioning System)

  5. Click here

    INSTALL FAN & GENERATOR V BELT (w/ Air Conditioning System)

  6. Click here

    INSTALL FAN & GENERATOR V BELT (w/o Air Conditioning)

  7. Click here

    INSTALL V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1 (w/ Air Conditioning System)

  8. Click here

    INSTALL VANE PUMP V BELT

  9. Click here

    INSTALL ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY

  10. Click here

    INSTALL WIRE HARNESS SUPPORT

  11. Click here

    INSTALL FRONT DOOR SCUFF PLATE RH

  12. Click here

    INSTALL FRONT SEAT ASSEMBLY RH