Click here

СТАРТЕР (для моделей мощностью 2,2 кВт) РАЗБОРКА

Click here
Click here
  1. Click here

    REMOVE STARTER YOKE ASSEMBLY


    1. Remove the screw and terminal 50 wire.

    2. A01BCRAE01

      Remove the nut and disconnect the terminal C wire.

    3. Remove the 2 crews and O-rings, and pull out the starter yoke assembly with the armature assembly.

  2. Click here

    REMOVE MAGNET STARTER SWITCH ASSEMBLY


    1. A01BCLTE01

      Remove the 2 screws and magnet starter switch assembly.

    2. Remove the return spring.

    3. A01BE3KE01

      Remove the following parts from the starter housing.

      (1) Starter clutch sub-assembly
      (2) Starter armature pinion
      (3) Starter idler pinion
      (4) Retainer
      (5) Clutch roller
    4. A01BG8EE01

      Using a magnetic finger, remove the steel ball.

  3. Click here

    REMOVE STARTER BRUSH HOLDER ASSEMBLY


    1. A01BBOEE01

      Using a screwdriver, hold the spring back and disconnect the brush.

    2. Disconnect the 4 brushes and remove the brush holder assembly.

  4. Click here

    REMOVE STARTER ARMATURE ASSEMBLY


    1. A01BFRAE01

      Using a plastic hammer, tap the end of the starter yoke assembly and remove the armature assembly.