Click here

МАСЛЯНЫЙ ФИЛЬТР УСТАНОВКА

Click here
Click here Click here
  1. Click here

    INSTALL OIL FILTER SUB-ASSEMBLY


    1. Apply clean engine oil to the gasket of a new oil filter.

      Note:

      Check and clean the oil filter installation surface.

    2. Lightly screw the oil filter into place by hand. Tighten it until the gasket contacts the seat.

    3. A01BABSE01

      Using SST, tighten the oil filter until the gasket contacts the seat, and then turn it further 3/4.

      09228-07501
  2. Click here

    INSTALL ENGINE SERVICE HOLE COVER NO.2


    1. Install the engine service hole cover No.2 with the 3 bolts.

      13 N*m 133 kgf*cm 10 ft.*lbf
    2. A01BFN9

      Return the carpet.

  3. Click here

    ADD ENGINE OIL


    1. Add the engine oil.

      Standard capacity
      Item Capacity
      Drain and refill with oil filter change 6.5 liters (6.9 US qts, 5.7 lmp. qts)
      Drain and refill without oil filter change 6.3 liters (6.7 US qts, 5.5 lmp. qts)
      Dry fill 7.2 liters (7.6 US qts, 6.3 lmp. qts)

    2. Install the oil filler cap.

  4. Click here

    CHECK FOR ENGINE OIL LEAKS


    1. Start the engine and check that no leakage from the connection with the oil filter and drain plug gasket.