МАСЛЯНЫЙ НАСОС ПРОВЕРКА


  1. REMOVE OIL PUMP ROTOR SET


    1. A01BFV2E01

      Remove the 7 bolts and oil pump cover from the timing chain or belt cover sub-assembly.

    2. Remove the oil pump rotor set from the timing chain or belt cover sub-assembly.

  2. INSPECT OIL PUMP RELIEF VALVE


    1. A01BF36E02

      Coat the oil pump relief valve with engine oil and drop it into the relief valve hole.

    2. Check that the oil pump relief valve falls in smoothly by its own weight. If it does not, replace the oil pump relief valve. If necessary, replace the timing chain or belt cover sub-assembly.

  3. INSPECT OIL PUMP ROTOR SET


    1. A01BFO8E12
      Text in Illustration
      *a Alignment Mark

      Install the oil pump rotors to the oil pump body with the alignment marks facing outward. Check that the oil pump rotors revolve smoothly.

    2. Check the tip clearance.


      1. A01BCVWE01

        Using a feeler gauge, measure the clearance between the drive rotor and driven rotor tips as shown in the illustration.

        Standard tip clearance
        0.040 to 0.160 mm (0.00157 to 0.00630 in.)
        Maximum tip clearance
        0.26 mm (0.0102 in.)

        If the tip clearance is more than the maximum, replace the oil pump rotor set.

    3. Check the side clearance.


      1. A01BDVWE01

        Using a feeler gauge and precision straightedge measure the clearance between the oil pump rotors and precision straightedge as shown in the illustration.

        Standard side clearance
        0.025 to 0.075 mm (0.000984 to 0.00295 in.)
        Maximum side clearance
        0.130 mm (0.00512 in.)

        If the side clearance is more than the maximum, replace the timing chain or belt cover sub-assembly.

    4. Check the body clearance.


      1. A01BI0XE01

        Using a feeler gauge, measure the clearance between the oil pump body and driven rotor as shown in the illustration.

        Standard body clearance
        0.0250 to 0.325 mm (0.000984 to 0.0128 in.)
        Maximum body clearance
        0.425 mm (0.0167 in.)

        If the side clearance is more than the maximum, replace the timing chain or belt cover sub-assembly.

  4. INSTALL OIL PUMP ROTOR SET


    1. A01BFO8E12
      Text in Illustration
      *a Alignment Mark

      Coat the oil pump rotor set with engine oil and place it into oil pump body with the alignment marks facing outward (pump body cover side). Check that the oil pump rotors revolve smoothly.

    2. Install the oil pump cover to the timing chain or belt cover sub-assembly with the 7 bolts.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }